Model/Brand/Package
Category/Description
Inventory
Price
Data
-
![]()
Category: insertion pinDescription: TE Connectivity The universal power module TE Connectivity universal power module hardware is designed to be compatible with Z-PACK 2mm HM, Z-PACK HS3, Z-PACK HM Zd, and Z-PACK TinMan connectors. This universal power module is a 3-position modular hard metric board to board system. ### TE Connectivity AMP Z-PACK ™ The Z-PACK 2 mm HM interconnect system is designed as a two-piece system for connecting free boards (sub boards or printed circuit boards) and fixed boards (mainboards, backboards, or rear panels), as well as for feedthrough connections through fixed boards.60141+$68.062810+$65.1035100+$64.5708250+$64.1565500+$63.50551000+$63.20962500+$62.79535000+$62.4402 -
![]()
Category: insertion pinDescription: TE Connectivity AMP-LATCH Universal pop-up 2.54mm x 2.54mm printed circuit board pin socket connector AMP-LOCH Universal pop-up covered printed circuit board mounting pin socket has a standard profile, 2.54 x 2.54mm centerline, and latch model that can be used with AMP-LOCH ribbon cable connectors. These printed circuit boards are equipped with AMP-LOCH pin sockets for military center and dual polarization, black UL 94V-0 GF thermoplastic housing, and offer printed circuit board vertical and printed circuit board right angle mounting styles. The socket with short latch is compatible with the AMP-LWATCH ribbon cable socket connector without stress relief, while the socket with long latch is compatible with the AMP-LWATCH ribbon cable socket with stress relief. For data on different latch options and contact coatings, please refer to the attached data sheet. For stress relief parts, please refer to inventory numbers 454-2390, 454-2463, and 454-2390 (typical). For mating connectors, please refer to stock numbers 454-2413, 719-8791, and 718-9245 (typical). **Supplementary Data * * --- * * Manufacturer Part Number * * | * * Direction * * | * * Latch Type * * | * Contact Plating * * | * Solder Tail Wire Length * * x-5499910-x | Vertical Printed Circuit Board Installation | Short | Gold Plating (0.00038) | 2.79mm x-5499160-x | Vertical Printed Circuit Board Installation | Short | Gold Plating (0.00076) | 2.79mm x-5499374-x | Vertical Printed Circuit Board Installation | Short | Gold Plating (0.00076) | 3.94mm x-54999923-x | Vertical Printed Circuit Board Installation | Long | Gold Plating (0.00038) | 3.94mm x-5102321-x | Vertical Printed Circuit Board Installation | Long | Gold Plating (0.00076) | 3.94mm x-5499206-x | Vertical Printed Circuit Board Installation | Length | Gold Plating (0.00076) | 2.79mm x-5499913-x | Right Angle Printed Circuit Board Installation | Short | Gold Plating (0.00038) | 2.79mm x-5499345-x | Right Angle Printed Circuit Board Installation | Short | Gold Plating (0.00076) | 2.79mm x-5499786-x| R89925+$29.495750+$28.2352200+$27.5293500+$27.35291000+$27.17642500+$26.97475000+$26.84877500+$26.7226 -
![]()
Category: insertion pinDescription: TE Connectivity AMP-Latch Thin box type ribbon cable socket connector for commercial performance flange polarized socket printed circuit board installation. Thin plug provides straight and right angle types with a length of 7.6+(line x 1.27) mm # # # TE Connectivity AMP Latch IDC ribbon cable connector81265+$19.505150+$18.6715200+$18.2047500+$18.08801000+$17.97132500+$17.83805000+$17.75467500+$17.6713 -
![]()
Category: insertion pinDescription: TE Connectivity AMP-Latch Ribbon cable socket connector AMP Latch ribbon cable socket connector with 2.54mm centerline. Part numbers X-1761681-X and X-1761679-X are thin, part numbers X-176133-X with center and military polarization are thin, part numbers X-827745-X and X-827746-X with center polarization and dual polarization rods are thin, part numbers X-828581-X and X-88582-X without polarization are standard profiles, part numbers X-828584-X, X-828586-X, X-828588-X, and X-828590-X with center and dual polarization are standard profiles, part numbers X-1761606-X with latch and center, and part numbers X-1761605-X with military polarization are thin, part numbers X-1761603-X, X-1761605-X, and X-28172X-X with latch and center are standard profiles. It is a thin, centrally polarized TE Connectivity AMP Patch IDC ribbon cable connector87645+$12.435950+$11.9045200+$11.6069500+$11.53251000+$11.45812500+$11.37305000+$11.31997500+$11.2667 -
![]()
Category: insertion pinDescription: Dynamic 5200 The D-4200 series of TE Connectivity dynamic series tube sockets have tin plated fixed feet to improve stability. The soldering tail wire of the printed circuit board of the D-4200 series socket is tin plated, and the contact plug is gold plated. The recommended printed circuit board thickness for these D-4200 series sockets is 1.6 to 2.4mm. Please refer to typical stock number 680-1001 for matching D-5200 series housings. ###TE Connectivity Dynamic 5000 Series59871+$102.252310+$97.8065100+$97.0063250+$96.3839500+$95.40581000+$94.96122500+$94.33885000+$93.8053 -
![]()
Category: insertion pinDescription: AMP FROM TE CONNECTIVITY 2-1634689-6 Wire to board connector, right angle, AMP-LOCH series, 26 contacts, pin holder, 2.54 mm, through-hole installation, 2 rows382610+$8.2116100+$7.8010500+$7.52731000+$7.51362000+$7.45895000+$7.39047500+$7.335710000+$7.3083 -
![]()
Category: insertion pinDescription: TE Connectivity Grace Inertia 3.3 mm Grace Inertia printed circuit board socket, with a pitch of 3.3mm. These Grace Inertia 3.3mm printed circuit board sockets use a built-in inertia locking mechanism in the housing to prevent human error during assembly. The inertia locking mechanism can simultaneously connect the circuit and lock the connector. Make a clicking sound to confirm the completion of the connection. If attempting to connect incorrectly, it will prevent the socket and socket contacts from coming into contact. This locking mechanism can prevent product defects caused by half matching and ensure stable connection. The inertia locking mechanism can also prevent external forces from causing pull-out, thereby providing a reliable connection when using the connector. These Grace Inertia 3.3mm printed circuit board sockets are designed ergonomically and can be easily operated manually. These printed circuit board sockets adopt a thick design, with a height of 8mm from the printed circuit board to the contacts, which can prevent the amino methyl ester coating from flowing into the housing. This feature is very useful when using connectors in applications that require waterproofing, such as washing machines. These Grace Inertia printed circuit board sockets are equipped with polarization pins or protrusions for precise calibration on the printed circuit board. These Grace Inertia 3.3 printed circuit board sockets use a four-color coding bonding method to avoid mismatches and blind matching. ###Features and advantages: Designed in accordance with ergonomics, easy to manually operate inertia locking mechanism, providing accurate bonding performance and safe and stable audio connection confirmation. Thick design, suitable for waterproof applications, positioning pin, designed to ensure accurate placement on printed circuit boards with color coded key design, ensuring easy identification and accurate bonding in accordance with IEC 60335-1 hot wire standard. These Grace Inertia 3.3 mm wire to board socket housings569110+$1.208350+$1.1456100+$1.1009300+$1.0740500+$1.04721000+$1.02032500+$0.98005000+$0.9711 -
![]()
Category: insertion pinDescription: TE Connectivity Grace Inertia 3.3 mm Grace Inertia printed circuit board socket, with a pitch of 3.3mm. These Grace Inertia 3.3mm printed circuit board sockets use a built-in inertia locking mechanism in the housing to prevent human error during assembly. The inertia locking mechanism can simultaneously connect the circuit and lock the connector. Make a clicking sound to confirm the completion of the connection. If attempting to connect incorrectly, it will prevent the socket and socket contacts from coming into contact. This locking mechanism can prevent product defects caused by half matching and ensure stable connection. The inertia locking mechanism can also prevent external forces from causing pull-out, thereby providing a reliable connection when using the connector. These Grace Inertia 3.3mm printed circuit board sockets are designed ergonomically and can be easily operated manually. These printed circuit board sockets adopt a thick design, with a height of 8mm from the printed circuit board to the contacts, which can prevent the amino methyl ester coating from flowing into the housing. This feature is very useful when using connectors in applications that require waterproofing, such as washing machines. These Grace Inertia printed circuit board sockets are equipped with polarization pins or protrusions for precise calibration on the printed circuit board. These Grace Inertia 3.3 printed circuit board sockets use a four-color coding bonding method to avoid mismatches and blind matching. ###Features and advantages: Designed in accordance with ergonomics, easy to manually operate inertia locking mechanism, providing accurate bonding performance and safe and stable audio connection confirmation. Thick design, suitable for waterproof applications, positioning pin, designed to ensure accurate placement on printed circuit boards with color coded key design, ensuring easy identification and accurate bonding in accordance with IEC 60335-1 hot wire standard. These Grace Inertia 3.3 mm wire to board socket housings61455+$3.155025+$2.921350+$2.7577100+$2.6876500+$2.64082500+$2.58245000+$2.559010000+$2.5240 -
![]()
Category: insertion pinDescription: TE Connectivity Economy Power TE Connectivity Economy Power (EP) connector 2.5 double row covered pin socket series. These 2.5 double row EP pin sockets with covers have tin plated columns, 2 or more of which are bent, and use UL 94 V-0 grade body material. The vertical EP 2.5 double row vertical socket has a printed circuit board alignment protrusion. ###TE Connectivity Economy Power (EP) Series73495+$5.159725+$4.777550+$4.5100100+$4.3953500+$4.31892500+$4.22335000+$4.185110000+$4.1278 -
![]()
Category: insertion pinDescription: TE Connectivity Economy Power TE Connectivity Economy Power (EP) connector 2.5 double row covered pin socket series. These 2.5 double row EP pin sockets with covers have tin plated columns, 2 or more of which are bent, and use UL 94 V-0 grade body material. The vertical EP 2.5 double row vertical socket has a printed circuit board alignment protrusion. ###TE Connectivity Economy Power (EP) Series35175+$4.737225+$4.386350+$4.1406100+$4.0354500+$3.96522500+$3.87745000+$3.842410000+$3.7897 -
![]()
Category: insertion pinDescription: TE Connectivity 2.50mm Economy Interconnection (EI) A series of Economy Interconnection (EI) connectors for printed circuit boards with covered pin sockets, with a pitch of 2.5mm. These EI socket plug connectors have copper plated and then bright tin plated contacts, natural nylon GF UL 94V-0 housing, and are suitable for vertical and right angle installation of printed circuit boards. Inventory number 719-4878 has reinforced fixing devices, and inventory number 173081-x has IDC termination. ###2.5mm TE Connectivity Economy Interconnection (EI) system43755+$3.350725+$3.102550+$2.9288100+$2.8543500+$2.80472500+$2.74265000+$2.717810000+$2.6806 -
![]()
Category: insertion pinDescription: HPI) These high-performance interconnect (HPI) sockets use square peg technology, allowing the product to be compatible with many other similar products in the industry. ###TE Connectivity High Performance Interconnect (HPI) Series42165+$1.945425+$1.801350+$1.7004100+$1.6572500+$1.62832500+$1.59235000+$1.577910000+$1.5563 -
![]()
Category: insertion pinDescription: MOD II Surface mounted tubeless needle holder 0.63mm square phosphor bronze pin stackable terminal PCT GV black shell Housing material PCT GV Black Post material Phosphor bronze Plating (contact zone) 0.8μm gold over 1.3μm nickel Plating (solder zone) 2.5μm tin over 1.3μm nickel ### 2.54mm TE Connectivity AMPMODU ™ Series - Model 2 (Europe) adopts a variety of modular interconnect systems with industrial standard 2.54mm (0.1 inch) grids, suitable for various industry applications. Designed for line to board or board to board connections, including stacking.73865+$19.811650+$18.9650200+$18.4908500+$18.37231000+$18.25382500+$18.11835000+$18.03367500+$17.9490 -
![]()
Category: insertion pinDescription: TE Connectivity MTA-156 Friction locking needle seat MTA-156 friction locking tube seat, with UL94V-0 white polyester shell. These MTA-156 friction locking sockets are available in both straight and right angled column styles, with tin plated or gold-plated contacts: part number X-640445-X straight, square column, tin plated, with 3.18 mm long solder tail wire. Part number X-641208-X straight, square column, 30 μ m gold-plated, with 3.18mm long solder tail wire. Part number X-641119-X straight, square pillar, 15 μ m gold-plated, with 3.18mm long solder tail wire. Part number X-640388-X straight, cylindrical, tin plated, with 3.18mm long welded tail wire. Part number X-644752-X straight, square column, tin plated, with 4.45mm long welded tail wire. Part number X-644753-X straight, cylindrical, tin plated, with 4.45mm long welded tail wire. Part number X-640387-X, bent right angle, square column, tin plated, with 3.18mm long welded tail wire. Part number X-640389-X front bend right angle, square pillar, tin plated, with 3.18mm long welded tail wire. Part number XX-641210-X front bend right angle, square pillar, 30 μ m gold-plated, with 3.18mm long welded tail wire. Part number X-641937-X straight, square column, tin plated, with 3.18mm long welded tail wire. ###Recognized UL (28476) and CSA (LR190) # # # 3.96mm TE Connectivity MTA Mass Termination Assembly (MTA) connector for multiple internal printed circuit board connections at a 0.156in. (3.96mm) pitch, significantly reducing workload for almost all cable harnesses. Provide production tools that allow for quick assembly of connectors onto discrete wires. One step components and stackable terminal socket housings are color coded according to wire size. Pre installed contacts are easy to maintain. Technical specifications include sleeve | material | nylon contact material | phosphor bronze plating | tin flammability level | UL94V-2 socket | material | polyester contact material | copper alloy plating | tin flammability level | UL94V-0 working voltage (VAC) | 250 m80725+$3.754425+$3.476350+$3.2816100+$3.1982500+$3.14252500+$3.07305000+$3.045210000+$3.0035 -
![]()
Category: insertion pinDescription: TE Connectivity 2.0mm Box type single row printed circuit board through-hole mounting socket - CT series CT series Box type single row printed circuit board plug-in support socket, with a 2.0mm centerline. These covered printed circuit board plug to board support sockets are installed vertically or horizontally using through-hole printed circuit boards and accept wire sizes of 22 to 28 AWG. Part numbers * * X-292250-X * *, * * X-292132-X * *, and * * X-262165-X * * have bent legs that help secure them to printed circuit boards. The pin contacts of these CT series plug-in printed circuit board pillar sockets are tin plated brass, and the housing is made of UL94V-0 nylon 66 thermoplastic. For suitable mating products, please refer to stock numbers 654-4023 and 680-1391 (typical) # # # TE Connectivity CT Connector System Tyco Electronics' TE Connectivity CT Interconnect Solution for micro wire to board and wire to wire connections. We offer two models with pitch of 1.5 mm and 2.0 mm, which is a shared terminal connector system used for making wire harnesses. 2 termination methods: IDC, crimping loose wire interconnect circuit range 2-30 AWG 22-30 knot, used for self-locking on wooden boards. Applications include: commercial equipment, industrial machinery, PC printers, fax, C-TV, audio, air conditioning, anywhere with signal or power lines528810+$0.707450+$0.6707100+$0.6445300+$0.6288500+$0.61311000+$0.59742500+$0.57385000+$0.5685 -
![]()
Category: insertion pinDescription: TE Connectivity Universal power socket connector Universal power cord to board printed circuit board mounting socket connector, with a 3.96mm centerline, can be paired with a universal power plug housing (see typical inventory number 719-4537). These universal power socket connectors provide right angle or vertical printed circuit board mounting configurations, and have bent legs (printed circuit board vertical mounting models) or board locks (printed circuit board right angle mounting models) for fixing printed circuit boards, with locking and polarization for precise and secure mating. E # # # Note Stock Number 718-9181 No Printed Circuit Board Fixed # # # TE Connectivity Universal Power Series84845+$5.444625+$5.041350+$4.7589100+$4.6380500+$4.55732500+$4.45655000+$4.416110000+$4.3556 -
![]()
Category: insertion pinDescription: Dynamic 1200 The D-1200 series of TE Connectivity dynamic series tube sockets have tin plated fixed feet to improve stability. The soldering tail wire of the printed circuit board of the D-1200 series socket is tin plated, and the contact plug is gold plated. The recommended printed circuit board thickness for these D-1200 series sockets is 1.0 to 1.6mm. The design of the D-1200 series sockets helps prevent contact bending during mating. ###Please refer to typical inventory number 706-4424 for matching D-1200 series casings. ###TE Connectivity Dynamic 1000 Series58545+$5.316325+$4.922550+$4.6468100+$4.5287500+$4.44992500+$4.35155000+$4.312110000+$4.2530 -
![]()
Category: insertion pinDescription: TE Connectivity AMPMODU Mod II 2.54mm Single row unshielded separated socket AMPMODU Mod II unshielded single row printed circuit board installation separated socket, with a 2.54mm centerline, soldered leads, and black or green thermoplastic 94V-0 grade housing. These AMPMODU Mod II uncovered detachable pipe sockets provide vertical or right angle installation directions and models for surface mounting. ###2.54mm TE Connectivity AMPMODU Mod II Series59661+$70.038510+$66.9933100+$66.4452250+$66.0189500+$65.34891000+$65.04442500+$64.61815000+$64.2527 -
![]()
Category: insertion pinDescription: TE CONNECTIVITY 171826-2 Wire to board connector, AMP EI series, 2 contacts, pin holder, 2.5 mm, through-hole installation, 1 row676010+$1.277150+$1.2109100+$1.1636300+$1.1352500+$1.10681000+$1.07842500+$1.03595000+$1.0264 -
![]()
Category: insertion pinDescription: TE Connectivity 2.54mm AMPMODU MOD II Standard profile double row covered pipe socket 2.54mm AMPMODU MOD II standard profile double row covered pipe socket, with end dimensions of 1.68mm and 0.64mm straight square columns. These AMPMODU MOD II double row 2.54mm covered tube sockets are installed with vertical printed circuit board through holes, equipped with brake window mating connector locks and black UL 94V-0 thermoplastic GF housing. These AMPMODU MOD II covered printed circuit board sockets offer different plating options for their contacts: part number X-103168-X is double-sided plated with 0.00076mm gold, and part number X-102618-X is double full plated with 0.00038mm gold. For suitable mating connectors, please refer to stock numbers 680-3445 and 745-4952 (typical). ###2.54mm TE Connectivity AMPMODU Mod II Series90065+$15.049750+$14.4066200+$14.0464500+$13.95641000+$13.86632500+$13.76345000+$13.69917500+$13.6348 -
![]()
Category: insertion pinDescription: TE Connectivity VAL-U-LOK Dual row pin holder VAL-U-LOK for right angle and vertical dual row printed circuit board installation, with a 4.2mm centerline and tin plated brass male pin contacts. These VAL-U-LOK pin sockets are designed for easy matching and separation, with forward and key locks to ensure precise alignment during mating. In addition, these VAL-U-LOK pin socket connectors have pins (or board locks) for alignment on printed circuit boards. The housing of these VAL-U-LOK pin sockets is made of UL94V-0 or UL94V-2 grade natural nylon. Part number X-2029171-X has UL94V-0 housing part numbers X-1586037-X, X-1586041-X, and X-2029170-X has UL94V-2 housing part numbers X-1586039-X and X-2029172-X has UL94V-2 housing and mounting pins part numbers X-1586043-X has UL94V-2 housing and screw mounting part numbers X-1586038-X and X-1586042-X has UL94V-0 housing part numbers X-1586040-X, X-2029173-X has UL94V-0 housing and mounting pins part numbers X-1586044-X has UL94V-0 housing and screw mounting printed circuit board mounting pin socket components, divided into vertical and 90 ° type through-hole assemblies. Printed circuit board pin socket attachment 2-24 contact positions (even numbers only) carrying male contacts # # # TE Connectivity VAL-U-LOK series connector system71825+$3.449325+$3.193850+$3.0149100+$2.9383500+$2.88722500+$2.82335000+$2.797710000+$2.7594 -
![]()
Category: insertion pinDescription: TE Connectivity 5.0mm Power Key (5.0 PKC) Pin socket connector Power Key (5.0 PKC) power circuit pin socket connector, with a 5.0mm contact centerline and compact design. These 5.0mm Power Key needle sockets have internal locking rods, color coded housings, can assist with blind mating, and a keying mechanism to prevent mismatches. These vertical printed circuit board mounting Power Key needle sockets are made of 6/6 glass filled nylon, with natural color coding and tin plated contacts. These 5.0mm Power Key needle sockets have A-type key connections. For more detailed information, please refer to the data sheet. Typical applications of these Power Key (5.0 PKC) male needle sockets include household appliance power circuits in specific gas equipment. For the 5.0mm Power Key plug housing, please refer to stock number 712-1432 (typical). ###TE Connectivity 5.0mm Power Key Series243310+$0.727750+$0.6899100+$0.6630300+$0.6468500+$0.63061000+$0.61452500+$0.59025000+$0.5848 -
![]()
Category: insertion pinDescription: Z-PACK™ Hard metric plugs and sockets comply with IEC 917 and IEC 1076-4-101 for 5-row high-density systems using press fit technology. All line impedances are matched with 50 Ω single ended and 100 Ω differential pairs for rated current | 1.5A @ 70 ° C ------- Contact | phosphor bronze plating | gold-plated nickel nominal resistance | shell | glass filled insulator UL94V-0 # # # TE Connectivity AMP Z-PACK ™ The Z-PACK 2 mm HM interconnect system is designed as a two-piece system for connecting free boards (sub boards or printed circuit boards) and fixed boards (mainboards, backboards, or rear panels), as well as for feedthrough connections through fixed boards.15061+$148.875610+$144.991850+$142.0143100+$140.9787200+$140.2019500+$139.16631000+$138.51902000+$137.8717 -
![]()
Category: insertion pinDescription: TE Connectivity AMPMODU MTE Polarization/locking 2.54mm printed circuit board socket AMPMODU MTE polarization/locking single row printed circuit board socket with a 2.54mm centerline. These AMPMODU MTE polarization/locking printed circuit board sockets are equipped with integrated locking, which provides forward fixation between the socket and the socket housing. They use IDC contacts, have 0.64mm square columns, and optional bent tail wire function, which helps prevent the connector from moving before reflow soldering. The contact area and bent tail wire of part number X-103908-X are 0.00076 μ m duplex gold-plated. The contact area and bent tail wire of part number X-104362-X are 0.00038 μ m duplex gold-plated. The entire contact area and bent tail wire of part number X-103669-X are 0.00254 μ m tin plated. The contact area of part number X-103735-X is 0.00076 μ m duplex gold-plated. The contact areas of part numbers X-104363-X, X-103638-X, X-103670-X, and X-104910-X are 0.00038 μ m duplex gold-plated. The entire contact area of part number X-103639-X is 0.00254 μ m tin plated. The TE Connectivity AMPMODU MTE series Amp Modu MTE provides wire pairs through 0.025 inch lead technology. Circuit board and wire to wire connectors. Provide single pin housing, sockets, straight and right angle plugs. Insulation displacement technology/relaxation crimping positive locking polarization fully sealed box design with proven Amp Modu socket contact design double cantilever, built-in anti stress44315+$1.641625+$1.520050+$1.4349100+$1.3984500+$1.37412500+$1.34375000+$1.331510000+$1.3133 -
![]()
Category: insertion pinDescription: TE Connectivity AMPMODU Mod II Standard 2.54mm single row covered tube socket AMPMODU Mod II 2.54mm standard covered tube socket, with black thermoplastic 94V-0 flame retardant shell, 0.64mm square column, and printed circuit board bracket. These AMPMODU Mod II 2.54mm shielded tube sockets offer right angle or vertical installation directions and various contact coating options. ###2.54mm TE Connectivity AMPMODU Mod II Series80025+$25.254550+$24.1752200+$23.5708500+$23.41971000+$23.26862500+$23.09605000+$22.98807500+$22.8801 -
![]()
Category: insertion pinDescription: TE Connectivity 1.27mm x 2.54mm AMPMODU System 50 board to board socket AMPMODU system 50 1.27 x 2.54mm covered and uncovered board to board printed circuit board socket connectors have high sealing design features and can be used to save printed circuit board space. The housing of these AMPMODU system 50 1.27 x 2.54mm pipe sockets is made of polarized high-temperature thermoplastic design, which can assist in the matching connectors and crimping for drainage. These AMPMODU system 50 socket uncovered models can stack daughter cards densely. These AMPMODU systems offer various configurations of 50 1.27 x 2.54mm board to board sockets, including single row, double row, vertical, right angle, through-hole, and SMT part numbers x-104074-x and x-104069-x with solder clips/printed circuit board pressing supports. ###TE Connectivity. 050 X. 100 AMPMODU System 5085385+$26.532150+$25.3982200+$24.7633500+$24.60451000+$24.44582500+$24.26445000+$24.15107500+$24.0376 -
![]()
Category: insertion pinDescription: TE Connectivity 3.5 mm MULTILOCK 070 The MULTILOCK 070 series of automotive connectors features a micro design. Used for line to line and line to board applications in automobiles. These MULTILOCK 070 series products feature a compact design, high-density 3.5mm contact center, durability, and ease of handling. These MULTILOCK 070 automotive connectors can protect the contacts from damage caused by the swinging effect (KOJIRI effect) during the mating and plugging stages. The MULTILOCK 070 plug and socket housing features a locking plate design, allowing for the use of spear free contacts. The use of spear free contacts can avoid entanglement and deformation of locking plates. The main feature of these Multilock 070 connectors is the locking mechanism. The standard MULTILOCK 070 plug and socket housing has an integrated dual locking mechanism on the online side, which ensures secure contact fixation. The MULTILOCK 070 MK II plug housing has a locking mechanism, including a 2-piece double locking plate for securing the contacts and preventing partial insertion. The MULTILOCK 070 series automotive connectors include plug and socket housings and PCB needle sockets, designed for wire to wire and wire to board applications. The plug housing requires a female pressure contact core, while the socket housing requires a male plug contact. The crimping contacts must be ordered separately. ###Features and advantages: Compact and durable design with high density. 3.5 mm pitch outer shell locking plate design protects contacts from damage caused by KOJIRI effects. Integrated dual locking system # # # Application: MULTILOCK 070 series automotive connectors are designed specifically for a range of automotive applications. These applications include powertrain systems, safety and security systems, convenience features, driver information, and vehicle chassis systems. ###TE Connectivity MULTILOCK connectors and contacts. This miniature high-density connector system provides wire to wire and wire to board I/O solutions; This scheme352910+$7.2948100+$6.9301500+$6.68691000+$6.67472000+$6.62615000+$6.56537500+$6.516710000+$6.4924 -
![]()
Category: insertion pinDescription: AMP FROM TE CONNECTIVITY 9-966140-5 Rectangular power connector, Junior Power Timer series, through-hole installation, pin holder, 6-point, 5mm, male41015+$18.295350+$17.5134200+$17.0756500+$16.96611000+$16.85672500+$16.73165000+$16.65347500+$16.5752 -
![]()
Category: insertion pinDescription: TE Connectivity Miniature Universal MATE-N-LOK Vertical Installation Printed Circuit Board Pin Socket Connector Miniature Universal MATE-N-LOK Vertical Installation Printed Circuit Board Pin Socket, with a 4.14mm centerline, is used for wire to board applications with pre installed tin plated or gold-plated pin contacts. These miniature universal MATE-N-LOK vertically mounted printed circuit board pin sockets feature a white UL94V-0 nylon housing and include a forward locking latch mechanism to ensure secure mating and locking of the board, facilitating the fixation of the printed circuit board with or without drain holes. For mating connectors, please refer to the part numbers of the miniature universal MATE-N-LOK plug housing and the miniature universal MATE-N-LOK 2 plug housing (both using socket contacts) X-770166-X、X-770170-X、X-770174-X、X-770178-X、X-770182-X、X-770186-X、X-770190-X、X-770743-X、X-794065-X、X-794066-X、X-794067-X、X-794068-X、X-794070-X Both X-794072-X and X-794072-X have discharge holes.25115+$29.973150+$28.6922200+$27.9749500+$27.79551000+$27.61622500+$27.41135000+$27.28327500+$27.1551 -
![]()
Category: insertion pinDescription: TE Connectivity AMPMODU MTE 2.54mm Surface mount compatible high-temperature pipe socket, with compression support AMPMODU MTE single row covered high-temperature pipe socket, with a pitch of 2.54mm and compression support/type iron tail function, which can help prevent the connector from moving before flow welding. The casing of these AMPMODU MTE sockets is made of high-temperature UL 94V-0 thermoplastic and is compatible with surface mounting. These 2.54mm AMPMODU MTE printed circuit boards are equipped with integrated latches that provide positive fixation between the socket connector and the socket housing, as well as orientation of the printed circuit board. These AMPMODU high-temperature surface mount compatible sockets have 0.64mm square pillars and gold-plated contact areas. ###The TE Connectivity AMPMODU MTE series provides wire to circuit boards and wire to wire connectors through 0.025-inch guide column technology. Provide single pin housing, sockets, straight and right angle plugs. Insulation displacement technology/relaxation crimping positive locking polarization fully sealed box design with proven Amp Modu socket contact design double cantilever, built-in anti stress42375+$14.386350+$13.7715200+$13.4272500+$13.34121000+$13.25512500+$13.15675000+$13.09527500+$13.0338
